Bidirectional Power in TimeView
How export from a bidirectional PAN-42 sensor appears on the TimeView chart, and how to add the Export energy counter.
- Getting Started
- Dashboard
- TimeView
- Energy Apps
- Alerts & Notifications
- Reports
- Administration & Settings
- Partners
- Import & Exports
- Mobile App
- Plans & Packages
- Security & Certification
- Deployment
- Hardware Manuals
- Datasheets & Specs
- Frequently Asked Questions (FAQ)
- Legal
- What’s New
- Bidirectional-Power
- Energy Star Portfolio Manager
- Panoramic AI
Table of Contents
What Is Bidirectional Power?
Quick refresher
A bidirectional circuit can carry power both ways: import (drawn from the grid, shown as positive) and export (sent back to the grid - for example, surplus solar or a bidirectional EV charger - shown as negative, below zero). Only PAN-42 sensors can be marked bidirectional. For the full explanation, see Bidirectional Power: What to Expect.
How Export Appears on the Chart
Power and Current: one line that goes below zero
For Power and Current, a bidirectional PAN-42 device has one line. It goes below zero the moment the circuit starts exporting, and comes back above zero when it goes back to importing. The area between the line and zero is shaded whenever the line is below zero, so export periods stand out.

Energy: bars that show the net
For Energy, each bar is the device's net energy for that time interval - what it imported minus what it exported.
- A bar above zero means the device imported more than it exported in that interval.
- A bar below zero means it exported more than it imported.
For example, on a Last 7 days chart, a sunny Saturday can show a bar of about -360 kWh while the other days stay above zero.

Cost and Carbon never go below zero
Cost and Carbon are held at 0 for any interval where the device was a net exporter. If you select several devices together, one device's export can lower the combined cost, but never below 0.
A solid zero line
Once any data on the chart goes below zero, TimeView draws a solid zero line and lines up zero across every Y-axis on the chart.
Comparing two periods
In Compare mode, Overlay draws both periods on the same axis, so zero always lines up.
In Split view, a Same scale switch appears next to the Overlay / Split control. It's on by default.
- On: both charts use the same Y-axis range, so the same height means the same value, and zero sits at the same height in both.
- Off: each chart uses its own scale, based on its own period. On a bidirectional site, zero can sit at a different height in each chart.
Your choice is saved for each site, and saved presets remember it.
Adding the Export Energy Counter
The Export energy counter is the sensor's own running total of all the energy it has ever exported - like a car's odometer. It only goes up, so it's drawn as a stepped line on its own axis, above zero. To see how much was exported over a period, compare the counter's value at the start and end of the period.
You can add it from the toolbar or from the legend.
From the toolbar
- Select a bidirectional PAN-42 device or circuit in the device tree.
- Click Add-ons in the TimeView toolbar.
- In the Import/Export group, check Export energy counter (Wh).
From the legend
- Click the add-ons icon next to the device's name in the Legend. The Chart series add-ons panel opens.
- Go to Overrides.
- Check Export energy counter (Wh). It's tagged Pan-42.

The counter appears on the chart as Exported - [device name], and in the legend under Energy add-ons. There's also an Import energy counter (Wh) next to it - the sensor's own running total of imported energy.
Notes:
- Bidirectional sensors only. The counter is only available for a PAN-42 sensor marked bidirectional in the Deployment Tool. Otherwise it's greyed out, with the message "Exported energy is only available from PAN-42 sensors marked bidirectional in the Deployment Tool".
- Devices and circuits only. You can't add it to a group or to the whole site.
- Up to 2 overrides. The Overrides section suggests adding up to 2 for a readable chart.
- Package. Adding it from the legend requires the Optimize package.
Sites With Generation Devices
If your view includes both consumption and devices in the Generation category (for example, a whole site that has PV/Solar), TimeView shows the generation side mirrored below zero. For Energy, Cost, and Carbon, it also adds hatched bars, a Net line, and a Net row in the tooltip and legend. This is part of PowerRadar's generation support, and works the same with or without bidirectional sensors.