Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

  • Contact Us
English (US)
US English (US)
ES Spanish
IT Italian
  • Home
  • Hardware & Deployment
  • Frequently Asked Questions (FAQ)
  • PAN-42 Sensor FAQs

Can I configure PAN-42 sensors for a Modbus setup?

Written by Omri Landman

Updated at April 30th, 2025

Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

  • Using the Platform
    Getting Started Administration Energy Applications Triggers and Notification Center Data Export Data Import Reports
  • Hardware & Deployment
    Frequently Asked Questions (FAQ) Hardware Datasheets and Deployment Guides Software Deployment Guide Troubleshooting Flow Charts
  • Interactive Demos
  • Legal
+ More

 

PAN-42 Modbus integration is available for Bridges on firmware v476 or higher. You can have up to 3 PAN-42 sensors configured per Bridge.

Download the attached Programmer's Guide below for Bridges that are configured for Modbus.

Bridge Modbus Programmers Guide.pdf

pan-42 sensors modbus configuration

Was this article helpful?

Yes
No
Give feedback about this article

Related Articles

  • Can I use the PAN-42 for sub metering applications?
  • The power measured on a PAN-42 does not match the power of a PAN-10/PAN-12/PAN-14 of the same device. Why is that?
Expand