Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

  • Contact Us
English (US)
US English (US)
ES Spanish
IT Italian
  • Home
  • Hardware & Deployment
  • Frequently Asked Questions (FAQ)
  • PAN-42 Sensor FAQs

How can I setup Modbus for my PAN-42 Sensor?

Written by Omri Landman

Updated at May 21st, 2025

Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

  • Using the Platform
    Getting Started Administration Energy Applications Triggers and Notification Center Data Export Data Import Reports
  • Hardware & Deployment
    Frequently Asked Questions (FAQ) Hardware Datasheets and Deployment Guides Software Deployment Guide Troubleshooting Flow Charts
  • Interactive Demos
  • Legal
+ More

PAN-42 Modbus integration is available for Bridges on firmware v476 or higher. You can have up to 3 PAN-42 sensors configured per Bridge.

Download the attached Programmer's Guide below for Bridges that are configured for Modbus.

Bridge Modbus Programmers Guide.pdf

If you have a Bridge that is of a firmware lower than v476, please submit a support ticket to request upgrade assistance.

pan-42 sensors modbus configuration modbus pan42 pan-42

Was this article helpful?

Yes
No
Give feedback about this article

Related Articles

  • Can I use the PAN-42 for sub metering applications?
  • If we have a PAN-42 installed, can we automatically use its measured power factor for subsequent downstream sensors?
  • What are the voltage limitations of the PAN-42 sensors?
  • The power measured on a PAN-42 does not match the power of a PAN-10/PAN-12/PAN-14 of the same device. Why is that?
  • Is PAN-42 a utility/revenue-grade meter?
Expand