Bidirectional Power: What to Expect
A guide to what changes across PowerRadar when a PAN-42 sensor is set up to track power flowing in both directions - where you'll see it, how the numbers and charts behave.
- Getting Started
- Dashboard
- TimeView
- Energy Apps
- Alerts & Notifications
- Reports
- Administration & Settings
- Partners
- Import & Exports
- Mobile App
- Plans & Packages
- Security & Certification
- Deployment
- Hardware Manuals
- Datasheets & Specs
- Frequently Asked Questions (FAQ)
- Legal
- What’s New
- Bidirectional-Power
- Energy Star Portfolio Manager
- Panoramic AI
Table of Contents
What Is Bidirectional Power?
What is it?
A standard circuit only ever consumes energy - power flows one way, from the grid into your load. A bidirectional circuit can carry power in both directions. It can draw power from the grid, and it can also send power back to the grid - for example, when rooftop solar produces more than the site is using, or when a bidirectional EV charger returns power from a vehicle's battery.
Bidirectional is available for PAN-42 sensors only, and it's opt-in. A circuit behaves this way once two things are true: it's monitored by a PAN-42 sensor (Panoramic Power's 3-phase power meter - see Why PAN-42?), and its Bidirectional switch is on for that sensor. Every other sensor, and every circuit that isn't marked bidirectional, keeps working exactly as before.
The most important thing to understand: on a bidirectional circuit, a negative reading is not an error. It means the circuit was sending power back to the grid at that moment. Before this feature, a negative reading was treated as a wiring problem and shown as zero. Now, for circuits marked bidirectional, PowerRadar treats it as real data.
Why does this matter to you?
- See export on the charts and widgets you already use - no separate tool needed.
- Cost stays trustworthy. Exporting power never turns into a negative bill.
- Nothing changes for sites that don't use it. If a sensor isn't marked bidirectional, its data looks exactly like it did before.
| Direction | Meaning | How it's shown |
|---|---|---|
| Import | Power drawn from the grid | Positive (above zero) |
| Export | Power sent back to the grid | Negative (below zero) |
| Net | Import minus export over a period | Positive if you were a net consumer, negative if you were a net exporter |

Where You'll See It
| Where | What changes |
|---|---|
| Deployment Tool | Where the Bidirectional switch is turned on for each phase of a PAN-42 sensor |
| TimeView | Power and Current go below zero during export, with the area under zero shaded. Energy shows the net and can go below zero. An optional Export energy counter shows the sensor's running export total |
| Real-time power widget | A two-sided gauge (import and export) and an energy summary split into Imported, Exported, and Net |
| Manual Export, Auto Export & TimeView's Create Exports | Energy is exported as net; an Export energy counter measurement is available for bidirectional devices |
| Heat Map, Largest power consumers & Energy Distribution | Power can show export; energy-based totals stay focused on consumption |
| PowerRadar mobile app | The gauge, import/export summary, Actual vs Average, Heat Map, and Time View support bidirectional sites |
Note: You won't see any bidirectional behavior until a PAN-42 sensor has its Bidirectional switch turned on. Everything else on your account keeps working as before.
Key Concepts
These ideas apply everywhere bidirectional data appears.
Energy shows the net. For a bidirectional device, each Energy value is what it imported minus what it exported in that time interval. When it exported more than it imported, the value is negative.
The export counter is a running total. The Export energy counter is the sensor's own total of all the energy it has ever exported - like a car's odometer. It only goes up, so it's never shown below zero. To see how much was exported over a period, compare the counter at the start and end of that period, or check the Exported figures in the Real-time power widget.
Cost never goes negative. Exported energy is never turned into a negative bill. Cost is held at zero for any interval where you were a net exporter.
Carbon never goes negative. Carbon is calculated from the energy you consumed and is always zero or above. Exporting energy doesn't reduce your reported carbon footprint.
Quick Reference: Measurement Types
| Measurement | Import | Export | Where you'll find it |
|---|---|---|---|
| Power | Positive | Negative - same line | TimeView, Heat Map, dashboard widgets |
| Current | Positive | Negative - same line | TimeView |
| Energy | Positive | Net value - negative when the interval was a net export | TimeView, Manual Export |
| Export energy counter | - | Running total, always positive | TimeView add-on, Manual Export |
| Cost | Positive | Held at 0 (never negative) | TimeView, Heat Map, widgets, exports |
| Carbon | Positive | Held at 0 (never negative) | TimeView, Manual Export |
Glossary
- PAN-42 - Panoramic Power's 3-phase power meter; the only sensor type that can be set up as bidirectional.
- Bidirectional - a per-phase switch in the Deployment Tool that tells PowerRadar to treat negative readings from that sensor as real export instead of a wiring fault.
- Import - power drawn from the grid. Shown as positive.
- Export - power sent back to the grid. Shown as negative.
- Net - import minus export over a period.
- Export energy counter - the sensor's running total of all exported energy. Always positive.
- Generation (category) - a device category for on-site generation sources, like PV/Solar. It's a separate setup from bidirectional.